Psion Teklogix 7530 G2 user manual 11.2.4 EAN, Enable Bookland EAN, Include Country, Addendum

Chapter 5: Configuration

Non-Decoded Scanners

5.11.2.4 EAN 13

Enabled

Set this parameter to on to enable “EAN 13” or off to disable it.

Enable Bookland EAN

Setting this parameter to ON allows your scanner to recognize Bookland EAN bar codes.

Include Country

If this parameter is enabled, the country code is included with the decoded bar code data.

Include Check

If this parameter is enabled, the check digit is included with the decoded bar code data.

Addendum

Important: Before “Addendum” can take effect, the “Short Code” parameter (see page 146) must be enabled.

An addendum is a separate bar code, supplementary to the main bar code.

This parameter provides three options: Disabled, Optional and Required. Depending on the value chosen for this parameter, an addendum is recognized

or ignored.

•Double-tap on Addendum to display a dialog box listing your options.

•Highlight an item, and tap on OK.

When “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this parameter is set to Optional, the scanner searches for an addendum and if one exists, appends it to the main bar code. When the parameter is set to Required, the scanner does not accept the main bar code without an addendum.

Note: Setting ‘Addendum’ to Optional reduces performance. Optional should only be selected if at least some of the bar codes being read have addendums.

150Psion Teklogix 7530 G2 Hand-Held Computer User Manual