Psion Teklogix 7530 G2 user manual Combo Charger Indicators, Charge Indicators

Chapter 6: Peripheral Devices & Accessories

Charge Indicators

6.6.5 Charge Indicators

The spare battery charge slot has an associated tri-colour LED indicator on the lower-right area of the front panel.

LED Behaviour	Charge Status
Off	No battery detected in the slot.
Solid green	Battery is fully charged.
Flashing green	Battery is charged to 75% capacity.
Solid yellow	Charge in progress.
	Battery temperature outside the charge range of between
Flashing yellow	5° C to 39° C (41° F to 102° F). Charging is attempted
	every five minutes until the battery is within the appropriate
	temperature range.
Solid red	Battery rejected (at insertion) or unable to complete charge
	on battery.
Flashing red	Charging circuit problem. Refer to “Troubleshooting” on
	page 218 for details.
	Table 6.2 Combo Charger Indicators

The combo charger supplies DC power to enable the 7530 G2 internal fast charger. Charge status is displayed on the 7530 G2 charge LED – the lower-right LED. Refer to “Charge LED” on page 43 for details.

Normally, it takes from 1.5 to 4.0 hours to fully charge the 7530 G2 internal battery.

Note: Battery charging continues whether the 7530 G2 is switched on or off.

6.6.6 Troubleshooting

The gang charger troubleshooting section also applies to the combo charger. Refer to “Troubleshooting” on page 218, for helpful tips.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 221