Psion Teklogix 7530 G2 user manual Add Source, Trigger Type, Trigger Owner

Chapter 5: Configuration

Manage Triggers

Add Source

Only existing trigger sources are shown in the Source combo-box. To add a new source to this list, tap on the Add Source button. A dialog box pops up, allowing you to select the keyboard key to use as a trigger source.

Figure 5.13 Add Source Dialog

Trigger Type

You can enable either an Up/Down or Double Click response to a trigger press. Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to the “owner”—that is, the application receiving the trigger press information—followed by a “trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released, and then pressed again, a “double-click” event will occur. If a mapping with the type Up/down has also been configured for the same source, it will only receive the first set of trigger events.

Trigger Owner

This identifies the driver or application receiving the trigger presses.

Show All

By default, inactive owners are not shown. By checking this checkbox, all owners, both active and inactive, are displayed.

112Psion Teklogix 7530 G2 Hand-Held Computer User Manual