Psion Teklogix 7530 G2 user manual 11.4.6 EAN, Transmit Number System

Chapter 5: Configuration

Decoded (Intermec ISCP)

5.11.4.6 EAN 8

Enabled

Set this parameter to on to enable “EAN 8”.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Convert To EAN 13

If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.

Prefix/Suffix

See “Prefix/Suffix” beginning on page 151.

5.11.4.7 UPC A

Enabled

Set this parameter to on to enable “UPC A” bar code scanning recognition.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Transmit Number System

If this parameter is enabled, the number system digit is transmitted with the decoded bar code data.

Convert To EAN 13

If this parameter is enabled, a UPC A bar code is converted to EAN 13.

Prefix/Suffix

Refer to page 151 for details.

5.11.4.8 UPC E

Enabled

Set this parameter to on to enable “UPC E”.

178Psion Teklogix 7530 G2 Hand-Held Computer User Manual