Psion Teklogix 7530 G2 user manual PDM Ports And Connectors

Chapter 6: Peripheral Devices & Accessories

Portable Docking Module (PDM)

Type B USB Device

RS232 Serial Port

Type A USB Host

15 VDC Power Jack

Figure 6.2 PDM Ports And Connectors

The interfaces available on the PDM are as follows:

•DC power jack (15VDC @ 2.5A)

•Type A USB host port (for connection to USB devices such as a mouse, keyboard, printer, etc.)

•Type B USB device port (for connection to a USB host such as a PC)

•RS232D DE9 serial port (for connection to a PC COM port or a serial device such as a printer)

The standard Psion Teklogix PDM kit (PN HU4001) includes the necessary DC power supply, USB cables and RS232D 9-pin cable.

Use only the recommended adaptor with the PDM – it includes transient suppressors that protect your 7530 G2 from damage.

The PDM contains reverse polarity and over voltage protection. If the DC power jack is wired backwards or exceeds 20VDC, the PDM shuts down to protect the 7530 G2, the PDM and the power supply from damage. Psion Teklogix does not recommend substituting the DC power supply provided with your PDM.

The DC power supplied by the PDM is sufficient to operate the 7530 G2 and fast charge its internal battery at the same time. The 7530 G2 can run from a PDM without a battery installed.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 227