Psion Teklogix 7530 G2 user manual Properties Tab

Chapter 5: Configuration

The Properties Tab

ties dialog box. Click on the Device Name tab to access the menu and change your settings. Then click on OK.

Although the name will have changed in the Properties menu in Bluetooth Controls, the radio only reads it on boot-up. For the changes to take effect, you must cold reset the 7530 G2 (see“Cold Reset” on page 27).

5.7.5 The Properties Tab

The Properties tab displays information about your 7530 G2, and provides some port options.

The Device Name field shows the device name of your 7530 G2. This name can be changed (see the Note on the previous page for details).

Device Class shows the Class of Device (e.g. desktop, hand-held), which is always set to Handheld.

Local Bluetooth Address shows the address of your 7530 G2 radio.

Port Prefix is used to set the port name to either BSP or COM. When the name is set to BSP, BSP2 to BSP9 are available for activated services (including the server). When COM is chosen, COM7 to COM9 are available.

NQuery Retry (Name Query Retry) governs the number of times the hand-held will attempt to query the names of other Bluetooth devices if the first attempt fails. (When the 7530 G2 scans for other devices, it sometimes fails to scan names.)

120Psion Teklogix 7530 G2 Hand-Held Computer User Manual