Psion Teklogix 7530 G2 user manual Configuring An Ieee 802.11 Radio In The Unit

Chapter 2: Basic Checkout

Configuring An IEEE 802.11 Radio In The Unit

2.3 Configuring An IEEE 802.11 Radio In The Unit

The most common 802.11 settings are configured as defaults. However, there are some fields that must be completed, including the SSID of your access point and the security methods implemented in the network (including access keys).

Important: If the 7530 G2 is equipped with a radio that has never been con- figured, the radio settings dialog box opens automatically when the unit is powered on. In this case, skip to Step 4 on page 19.

Note: In most situations, the configuration of your 802.11 radio will require parameter setting and access keys from a network administrator.

Network administrators should review the detailed security information in this section in order to effectively configure the 802.11 wireless network.

To configure the 802.11 radio:

1.Press on [BLUE][0] to display the Start Menu.

Tap on Settings>Network and Dial-up Connections.

If you’re using the keyboard, press [BLUE] [0] to display the Start Menu. Use the [DOWN] arrow key to highlight Settings. Press the [RIGHT] arrow key to display the sub-menu. Highlight Network, and press [ENTER].

Figure 2.1 Network And Dial-Up Connections

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 17