Psion Teklogix 7530 G2 user manual Operator Controls, Charge Indicators, Charging Batteries

Chapter 6: Peripheral Devices & Accessories

Operator Controls

A green indicator in the lower-right lights to indicate power is present. All charge indicators flash momentarily at powerup to indicate that the charger is ready for operation.

If you choose to wall mount the charger, follow the instructions packaged with the mounting bracket kit. Be sure to locate the charger in an area where there is no risk of injury to persons walking in the vicinity.

6.5.2 Operator Controls

The gang charger does not have operator controls or a power switch.

6.5.3 Charge Indicators

Each battery charge slot is equipped with a tri-coloured LED to indicate the charge status of the battery. When 7530 G2 batteries are inserted in the charger, the colour and behaviour of the LEDs associated with the charge wells in use indicate the status of the charge.

LED Behaviour	Icon	Charge Status
Off		No battery detected in the slot.
Solid green		Battery is fully charged.
Flashing green		Battery is charged to 75% capacity.
Solid yellow		Charge in progress.
		Battery temperature out of charge range between 5° C
Flashing		to 39° C (41° F to 102° F). This icon indicates that the
		charger is waiting to charge. Charging is attempted
yellow
		every five minutes until the battery is within the
		appropriate temperature range.
Solid red		Battery rejected (at insertion) or unable to complete
		charge on battery
Flashing red		Charging circuit problem. Refer to “Troubleshooting”
		on page 218.

Table 6.1 Gang Charger Indicators

6.5.4 Charging Batteries

•Install the battery with the battery contacts facing the charger. Slide the battery between the guide rails until it lightly latches in place.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 217