Psion Teklogix 7530 G2 user manual Battery Safety, Removing And Installing The Battery Pack

Chapter 3: Getting To Know Your 7530 G2

The Battery

3.2 The Battery

The hand-held operates with a Lithium-Ion battery pack. Preparing the unit for operation requires that a battery pack be charged and installed in the 7530 G2.

3.2.1 Battery Safety

Important: Before attempting to install, use or charge the battery pack, it is critical that you review and follow the important safety guidelines in the section entitled “Lithium-Ion Battery Safety Precautions” on page XII.

3.2.2 Removing And Installing The Battery Pack

Note: TURN OFF THE HAND-HELD BEFORE REMOVING THE BATTERY PACK. If you do not turn the hand-held off before removing the battery, it may be necessary to reboot the unit. Any active sessions may be lost.

Removing The Battery Pack

•If your unit is equipped with a handstrap, unhook it from the base of the battery.

•Press down the release tab at the top of the battery, and slide the battery out.

Installing The Battery Pack

To install the battery pack:

•Slide the battery pack with the contoured plastic facing you into the 7530 G2. Click the battery into place.

•If your computer is equipped with a handstrap, insert the hook at the end of the handstrap into the slot at the base of the battery.

3.2.3 Battery Chargers

Important: FOR DETAILED INFORMATION about chargers and docking stations, refer to Chapter 6: Peripheral Devices & Accessories beginning on page 213. For battery safety, refer to “Lithium-Ion Battery Safety Precautions” on page XII.

All batteries must be charged before use. The battery can be charged with a variety of chargers. These include:

32Psion Teklogix 7530 G2 Hand-Held Computer User Manual