Psion Teklogix 7530 G2 user manual Calibrating The Touchscreen, Attaching The Pistol Grip

Chapter 2: Basic Checkout

Attaching The Pistol Grip

2.1.5.2Attaching The Pistol Grip

Note: A Phillips head screwdriver is required.

The pistol grip is attached to the back of the 7530 G2 using the four threaded inserts in the upper part of the 7530 G2 casing. Four black #4-40 Phillips head screws are provided with this accessory.

Note: Prior to installation, make sure the trigger mechanism is securely snapped into the pistol grip body and that the trigger operates properly.

•Position the pistol grip so that it fits snugly over the back of the unit and the inserts on the back of the hand-held are aligned with the holes in the pistol grip.

•Using a Phillips screwdriver, securely fasten the pistol grip to the back of the 7530 G2.

2.2Calibrating The Touchscreen

Your 7530 G2 touchscreen will need to be calibrated. Refer to “Calibrating The Touchscreen” on page 41 for details.

16Psion Teklogix 7530 G2 Hand-Held Computer User Manual