Psion Teklogix 7530 G2 Channel Tab, Default All Parameters, Channel Number, Power Up Channel

Chapter 5: Configuration

Channel Tab

Default All Parameters

•Tap on the Default all Parameters button to return all registry parameters to default values.

When this button is pressed, a screen appears asking if you’re sure you want to return all parameters to their default values.

•Tap on the Yes button to return values to their default settings.

Note: This button does not default the radio parameters set under the Radio tab.

5.10.2 Channel Tab

Channel Number

This parameter determines the operating radio channel of the 7530 G2. The allowable range for this parameter is 1 to 20. The default value is 1.

Note: The Channel Number dropdown menu displays only the channels that have been enabled in the Channel Enable List.

Power Up Channel

When this parameter is enabled (checked), the 7530 G2 begins communicating on the channel specified in the Channel Number parameter when the unit is powered up. This setting may prevent the migration of 7530 G2s to the same channel due to uneven coverage in some sites.

If this parameter is disabled (unchecked), the unit will continue communicating on the same channel that it was on before it was powered off.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 135