Psion Teklogix 7530 G2 2D UPC Half Block Stitching SE2223 only, Clsi Editing, Notis Editing

Chapter 5: Configuration

Decoded (Internal) Scanners

2D UPC Half Block Stitching (SE2223 only)

Setting this parameter to on enables “UPC Half Block Stitching” for the SE 3223 omnidirectional engine only.

5.11.3.12 Codabar

Enabled

Set this parameter to on to enable “Codabar”.

Set Length L1 And Set Length L2

Lengths for “Codabar” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner.

Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 5 to 55.

CLSI Editing

When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar symbol.

Note: Symbol length does not include start and stop characters.

NOTIS Editing

When enabled, this parameter strips the start and stop characters from decoded Codabar symbol.

Field Size/Chars

Refer to page 148 for details.

5.11.3.13 Code 93

Enabled

Set this parameter to on to enable “Code 93”.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 167