Psion Teklogix 7530 G2 user manual Addendum Security, Clsi Library System

Chapter 5: Configuration

Decoded (Intermec ISCP)

Addendum Security

This parameter defines the security level for Addendum Add-on 2 and Addendum Add-on 5. The higher the security level, the lower the decode rate, which can be set from 0 to 100.

GTIN Compliant

GTIN (global trade item number) processing transmits EAN 128 as the 14-character EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.

Important: When EAN 128 and GTIN processing are both activated, it is not possible to read normal EAN 128 Codes.

Reading Range

Determines the reading distance from which a bar code can be successfully scanned. The default setting Extended, allows for increased reading distance.

5.11.4.10 Codabar

Enabled

Set this parameter to on to enable “Codabar”.

Start/Stop Transmit

Codabar can use the following sets of characters as start and stop characters: a, b, c, d

A, B, C, D

a, b, c, d, /, t, n, *, e DC1, DC2, DC3, DC4

Thus, when a set is chosen, the first and last digits of a Codabar message must be one of those characters and the body of the message should not contain these characters. Setting this parameter to Not Transmitted strips the start and stop characters from this bar code.

CLSI Library System

When enabled, spaces are inserted after characters 1, 5, 10 in the 14-character label (used in the USA by libraries using the CLSI system).

180Psion Teklogix 7530 G2 Hand-Held Computer User Manual