Psion Teklogix 7530 G2 user manual Codabar, Strip Start/Stop Chars

Chapter 5: Configuration

Non-Decoded Scanners

Include Number Sys

If this parameter is enabled, the number system digit is included with the decoded bar code data.

Include Check

When enabled, the check digit is included with the decoded bar code data.

Addendum

Important: Before “Addendum” can take effect, the “Short Code” parameter (see page 146) must be enabled.

Refer to “Addendum” on page 150.

Prefix/Suffix

Refer to page 151 for details.

5.11.2.8 Codabar

Enabled

Set this parameter to on to enable “Codabar” or off to disable it.

Strip Start/Stop Chars

Codabar uses the characters A, B, C, and D as start and stop characters. Thus, the first and last digits of a Codabar message must be A, B, C, or D, and the body of the message should not contain these characters. Setting this parameter to ON strips the start and stop characters from this bar code.

Field Size/Chars

Refer to the description beginning on page 148 for details.

5.11.2.9 Code 93

Enabled

Set this parameter to on to enable “Code 93”.

Field Size/Chars

Refer to the description beginning on page 148 for details.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 153