Psion Teklogix 7530 G2 user manual Narrow Band Radio Setup, Info Tab, Statistics Screen

Chapter 5: Configuration

Narrow Band Radio Setup

5.10 Narrow Band Radio Setup

Keep in mind that the Narrow Band icon is only visible in the 7530 G2 Control Panel when a Narrow Band radio is installed in the unit.

•In the Control Panel, tap on the Narrow Band Radio icon.

5.10.1 Info Tab

In the Narrow Band Radio dialog box, the Info tab displays information about the radio – it cannot be edited.

The Power information in this screen indicates the power of the radio installed in the unit – 0.5 or 1.0 W. The “Serial Number” is the identifier for the radio and is used by the protocol when the “Auto Radio Address” parameter is enabled. The “CIS Data” (Card Information Structure) is manufacturer information describing the PC Card installed in the 7530 G2. “DSP x.x / FPGA 0xNN” indicates the firmware revision of the radio’s DSP (x.x) and FPGA (0xNN) where x.x and NN represent actual revision numbers.

Statistics Screen

•Tap on the Statistics button to display the Protocol Statistics screen.

132Psion Teklogix 7530 G2 Hand-Held Computer User Manual