Psion Teklogix 7530 G2 user manual Accepted Start Char, Minimum Length, Ean

Chapter 5: Configuration

Decoded (Intermec ISCP)

Accepted Start Char

This parameter allows the user the option of using one of the two start/stop characters or both ($ char, * char, $ and * char).

Check Digit Verification

Uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. The available options are: Disabled, MOD 43 Check, French CIP, or Italian CIP.

Notes: French CIP (French pharmaceutical) is only used with bar codes contain- ing 7 characters.

Italian CIP (Italian pharmaceutical) is also known as Code 32. It is trans- mitted as a standard Code 39 if checksum is not validated.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Field Size/Chars

Refer to page 148 for details.

5.11.4.4 Code 128

Enabled

Setting this parameter to on enables “Code 128”.

EAN 128

To successfully scan this type of bar code, EAN 128 must be enabled. “EAN” bar codes include group separators and start codes.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 175