Psion Teklogix 7530 G2 user manual Matrix 2, Enable Plessy

Chapter 5: Configuration

Decoded (Intermec ISCP)

Set Length L1, Set Length L2, And Set Length L3

Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner.

Length Mode

You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.

Field Size/Chars

Refer to page 148 for details.

5.11.4.14 Matrix 2 of 5

Enabled

Set this parameter to ON to enable “Matrix 2 of 5”.

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Field Size/Chars

Refer to page 148 for details.

5.11.4.15 MSI Plessey

Enabled

Set this parameter to on to enable “MSI Plessey”.

Enable Plessy

Set this parameter to on to enable the “Plessy” bar code.

Check Digit Verification

Uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. The available options are: MOD 10 Check, or Double MOD 10 Check.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 183