Psion Teklogix 7530 G2 user manual Servers Tab, Outgoing Tab

Chapter 5: Configuration

The Servers Tab

5.7.2 The Servers Tab

The Bluetooth connection is initiated from your 7530 G2 to the remote device – therefore the 7530 G2 is called the ‘client’ and the remote is called the ‘server’. The Servers tab displays the server profiles that can be activated in your 7530 G2. There is currently one server profile available: Serial.

•Tap on the checkbox to activate the server, and it will display the associated port name beside the server name.

Once you activate a server profile, it is recommended that the 7530 G2 be rebooted before you try to bond from a server.

Note: You do not need to reboot if you are deactivating a server.

5.7.3 Outgoing Tab

Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth devices (one at a time), but you have the freedom to switch on-the-fly.

The Outgoing Port checkbox allows you to create the Outgoing port. When the port is created, the Outgoing tab lists the port name.

118Psion Teklogix 7530 G2 Hand-Held Computer User Manual