Psion Teklogix 7530 G2 Plessy Transmit Check Digit, Plessy Minimum Length, Standard 2 of 5 Format

Chapter 5: Configuration

Decoded (Intermec ISCP)

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Plessy Transmit Check Digit

If the check digit is to be transmitted with the Plessy data, this parameter must be enabled.

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Plessy Minimum Length

Minimum lengths for the Plessy bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Field Size/Char

Refer to page 148 for details.

5.11.4.16 Discrete 2 of 5

Enabled

Set this parameter to on to enable “Discrete 2 of 5”.

Standard 2 of 5 Format

You can choose as the standard format either Identicon (6 start/stop bars) or Computer Identics (4 start/stop bars).

Check Digit Verification

Uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. The available options are: Disabled, or MOD 10 Check.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

184Psion Teklogix 7530 G2 Hand-Held Computer User Manual