Masterpage:Right-NoTitle0
47
Filename [DVS3EK_3-EN.fm]
Page 47 November 5, 2001 1:37 pm
Normal Dubbing
(from VHS to DV)
NOTES:
●If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to copy. It is
recommended to conduct a test with unimportant cassettes
first.
●There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing
is not recorded.
●To cancel the dubbing mode, press PR +/– so that the dubbing
direction indicator ( VHS) goes off.
●Before you start dubbing, set “SOUND MODE” to the
appropriate mode. (墌pg. 71)
You can dub selected scenes on a tape, starting and stopping
wherever you wish.
ALoad cassettes.
For the VHS deck
Insert a VHS (or S-VHS) cassette with the record safety
tab removed.
For the DV d eck
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
BSelect the dubbing direction.
Press .
●The dubbing direction indicator ( VHS) lights.
CSet the tape speed.
Press DV, then press SP/LP (p).
●“DV}VHS” appears on the TV screen if “O.S.D.” is set to
“ON”. (墌pg. 67)
DLocate the start point on the VHS deck.
APress VHS.
BPress 4 to start playback.
CPress 9 to pause playback a little before the start
point.
EPrepare the DV deck for dubbing.
APress DV.
BPress and hold 9 and press 7 so that the DV deck
enters the Record Pause mode.
●VHS playback indicator and DV recording indicator light.
FStart dubbing.
Press START
.
GPause dubbing.
Press START
.
●The DV deck enters the Recording Pause mode, then the VHS
deck enters the Dubbing Pause mode.
HEnd dubbing.
Press 8 to stop recording on the DV deck. Then press
VHS and press 8 to stop playback on the VHS deck.
123
456
789
1
2
1
2
3
0
3
4
4
132
DVS3EK_1-EN.book Page 47 Monday, November 5, 2001 1:43 PM