JVC LPT0617-001A Select the recording deck, Set the recorder’s input mode, Start the camcorder

48 EDITING (cont.)

Edit From A Camcorder

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

You can use a camcorder as the source player and your recorder as the recording deck.

You can perform digital dubbing if you connect a device such as a camcorder which has a DV IN/OUT connector. Because the signals are digital, there is no loss of video or audio quality as a result of editing.

A Make connections.

AIf the camcorder has no S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the recorder’s front panel AUDIO and VIDEO input connectors.

BIf the camcorder has an S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and S-VIDEO OUT connectors to the recorder’s front panel AUDIO and S-VIDEO input connectors.

CIf the camcorder has a DV IN/OUT connector ...

... connect the camcorder’s DV IN/OUT connector to

the recorder’s DV IN/OUT connector.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.

B Select the recording deck.

Press VHS or DV.

C Set the recorder’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1”.

●When using the VHS deck as the recording deck, set “VHS F-1 INPUT” to “VIDEO” for the AUDIO/VIDEO input connectors,

or “S-VIDEO” for the AUDIO/S-VIDEO input connectors, depending on the connectors being used ( pg. 53).

D Set the edit mode. (VHS deck only)

See “PICTURE CONTROL” on page 68.

E Start the camcorder.

Engage the Play mode of the camcorder.

F Start the recorder.

Engage the Record mode of the recorder.