Filename [DVS3EK_2-EN.fm]
Masterpage:Left
36
Page 36 October 13, 2001 3:26 pm
TIMER RECORDING
VIDEO Plus+® Time r
Programming
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
You can use the remote control with LCD panel to enter the
PlusCode number.
ATurn on the recorder.
Press 1.
BLoad a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
CSelect the deck.
Press VHS or DV.
DAccess the PlusCode display.
Press LCD PROG.
The LCD panel looks like this:
EEnter the PlusCode number.
Press the number keys to enter the PlusCode number of a
programme you wish to record.
●If you make a mistake, press & and input the correct number.
The PlusCode number you enter appears on the LCD panel:
FTransmit the PlusCode number.
Press to transmit the PlusCode number from the remote
control to the recorder.
●If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Input a
valid PlusCode number.
Before performing the VIDEO Plus+ Timer
Programming:
●Make sure that the recorder’s built-in clock is set properly.
●Turn on the TV and select the AV mode.
123
456
789
1
2
1
2
3
0
3
4
4
LCD panel
DVS3EK_1-EN.book Page 36 Monday, November 5, 2001 1:43 PM