Kodak 3000DSV-E manual Indicators

9Exposure Mode Key — press to select between the Auto or Manual Exposure modes.

10Exposure Adjustment Keys — adjusts the density of the image to be printed during the Auto or Manual Exposure mode.

•Darker: supports darker image density.

•Lighter: supports lighter image density.

11Multi-Print Display — displays the number of prints to be made. Also displays corresponding codes in the event of a malfunction or paper misfeed. The blinking number in this display indicates the print cycle in progress.

12Multi-Print Keys — used to input the number of prints to be made. This function is only available in the PR mode.

•10: increases the number of prints to be made in increments of 10 (10, 20, 30 ...90, etc.)

•1: increases the number of prints to be made in increments of 1 (1, 2, 3 ... 9, etc.)

13Clear/Stop Key — clears the setting on the Multi-Print Display, resets the display to 1 or stops a multi-print cycle. This function is only available in the PR mode.

14Start Key — starts the print (scan) process of the displayed image.

15Indicators:

Misfeed/Call Kodak indicator: lights up when a paper misfeed or malfunction occurs.

Wait indicator: lights when the scanner is initializing and when the printer is warming up.

Closure Failure indicator: lights up if the printer cover is open.

Add Toner indicator: blinks when the imaging cartridge of the printer is running out of toner and lights up when the cartridge is completely out of toner.

Add Paper indicator: lights up when the printer is not loaded with the selected paper size or when either the Paper Feeding Tray or Paper Cassette has run out of paper with Auto Paper selected.

A-61371 September 2004 2-3