Kodak 3000DSV-E manual Correcting a number, Selecting Auto Masking

Correcting a number

To reset an entry:

•Press the Clear/Stop key, which resets the number on the Multi-Print display to “1”.

Using Auto Masking The Auto Masking function prevents the frame (non-image area) of a film image from appearing on the print.

Selecting Auto Masking

• Press the Auto Masking key to turn on this function.

Correction

Operating Conditions for Auto Masking

A

B

A

B

BB

•The image area of the screen must provide at least 45 mm horizontally and vertically.

•The width of the frame to be masked must be at least 10 mm.

NOTE: If the film image on the screen does not meet the above requirements, the Auto Masking function will not work properly. Auto Masking is a frame erasing feature, it cannot remove an image from in between two separate frames.

A B

A C

3-10 A-61371 September 2004