Using the Cycle Print Mode
Centering
• Press the Centering/Fit key to turn on Centering.
Centering/Fit
NOTE: Centering/Fit mode cannot be used if Masking is selected.
Fit
• Press the Centering/Fit key to turn on Fit.
Centering/Fit
NOTE: Fit mode cannot be used when the scanner is connected to the PC.
This function automatically scans the next image following a preset period of time. Images are manually loaded on the carrier glass in between cycles.
This is a system setting that must be entered by an Kodak Service Representative.
If you want to use the Cycle Print Mode, ask your Kodak Representative to make the necessary system setting, then you can perform the following functions.
