Kodak 3000DSV-E manual Year, Month and Date Set mode, Set Imprint mode, Code, Setting Value

Year, Month and Date Set mode

The print pattern for the Date Print function can be set with this function.

1.Press and hold the Shift key and the Paper Selection key.

2.Select U6 in the User mode.

NOTE: Press the Exposure Mode key to display d*. The table below shows the amount of time based on the setting value.

Code	Setting Value
d0	Year, month, day (2004.05.15)
d1	Month day year (05 15 2004)
d2	Day month year (15 05 2004)
d3	Month, day Hours:minutes (05.15 13:45)

Set Imprint mode

Year: 4 digits of dominical year

Month: 2 digits

Day: 2 digits

Hour: 2 digits (24-hour system)

Minutes: 2 digits

3.Press the Exposure Adjustment key (Darker or Lighter) to select the desired setting value.

4.Press the Start key to validate the setting.

If the time of day becomes incorrect for the Date function, you can reset it by following the procedure below.

1.Press and hold the Shift key and the Paper Selection key.

2.Select U7 in the User mode.

3.Press the Exposure Mode key. When the Exposure Mode key is pressed, both the Exposure Display and Multi-Print Display light up steadily.

NOTE: In the initial condition, the year default setting is displayed.

A-61371 September 2004 3-23