Selecting the image density

Entering the number of prints to be made

Using Auto Exposure

1. Press the Exposure Mode key to select the Auto Exposure mode.

2.If the Auto Exposure setting is not satisfactory, press the appropriate Exposure Adjustment key, either Lighter or Darker, to set the desired image density.

Using Manual Exposure

1.Press the Exposure Mode key and select the Manual Exposure mode.

2.Press the appropriate Exposure Adjustment key, either Lighter or Darker, to set the desired image density.

Entering a number from 1-9

• Enter the desired number of prints using the Multi Print key “1”.

If the “1” key is pressed when “9” is displayed, the number on the display is incremented by one: 10, 11, 12, etc.

Entering a number from 10- 99

1.Set the tens digit using the “10” key.

2.Set the units digit using the “1” key.

For example, to set “25” press the “10” key twice and press the “1” key five times.

A-61371 September 2004

3-9

Page 32
Image 32
Kodak 3000DSV-E manual Selecting the image density, Using Auto Exposure, Using Manual Exposure, Entering a number from