3 Using the Scanner
This chapter provides procedures on how to us the Kodak
Following is an outline of the basic printing procedure. Detailed procedures on these steps can be found later in this chapter.
1.Load the film. The procedure for loading film is determined by the type of Film Carrier (optional) that is being used. Review the Operator’s Manual that came with your Film Carrier for more information.
2.Select and replace the lens.
3.Select the connection mode.
4.If desired, zoom, focus or rotate the image.
5.Select the paper size. If both 8 1/2 x 11” (A4) and 11 x17” (A3) are loaded, the system can select the correct size automatically.
6.Select the print position.
7.Select the image density.
8.Enter the number of prints to be made.
9.Adjust the image processing features.
10.Print and scan the displayed image. The printing or scanning of the image appearing on the screen is initiated after the Start key is pressed.
