Kodak 3000DSV-E manual Using Electrical Zoom, Job Recall

Calling the Job Program To call a registered Job Program:

1. Press the Shift key and the Job Recall key together.

Using Electrical Zoom

Job Recall

Each time the Job Recall key is pressed while the Shift key is held down, the display is cycled in order of 1J to 2J to 3J.

When the desired setting is displayed, release the keys.

In addition to using the lens to zoom, the electrical zoom function has been provided for magnifying the image when it is printed.

Zoom+: When the Zoom+ key is pressed with the Shift key, the magnification is increased by an increment of 0.01X (up to 2.00X).

Zoom-: When the Zoom- key is pressed with the Shift key, the magnification is decreased by a decrement of 0.01X (down to 0.50X).

NOTE: The Zoom magnification is displayed in the Multi-Print display to 2 decimal places.

The Zoom magnification level is displayed in the Exposure display.

Example: When the magnification is 0.50X, it is displayed as 50. When the magnification is 1.50X, it is displayed as 50 also. When the Zoom magnification is changed, the display is made in the Multi-Print display as follows.

When it is returned to the standard magnification, this display goes off. When the Zoom function is used, Multi-Print can be set only up to 9.

3-18 A-61371 September 2004