Auto Power Save/ Projection Lamp functions
To turn the power off
• Press the Power switch of the scanner to the O (Off) position.
This system provides two functions that help to decrease power consumption:
•The Auto Power Save function that automatically shuts down power to the printer heater.
•The Auto Projection Lamp OFF function that automatically turns off the Projection Lamp of the scanner.
Both are activated when the system is left idle for a specified period of time.
These functions may be disabled or enabled. When enabled, timing can be selected from either 30 or 60 minutes. The default for both of these functions is Disabled. Contact your Kodak Service Representative for more information.
When the system is in the Auto Power Save mode, each outside segment of the
