Psion Teklogix 7530 G2 user manual Active Conn. Tab

Chapter 5: Configuration

Active Conn. Tab

The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The * column indicates the currently selected service. You can tap on Unselect to reset the current selection, or you can tap on Select to make a selection. The Remove button deletes the service from the outgoing list.

The Prompt menu determines the behaviour of the pop-up Selection menu. Choosing Everytime causes the Selection menu to be displayed each time an outgoing port is created. If you choose Once, the menu is displayed only when a partner service is not selected.

To display the Selection menu at any time:

•Press [CTRL] [ALT] [F1], and switch the partner Bluetooth device.

If a connection to a partner device already exists, the connection is dropped and another connection to the newly selected device is created instantly without disrupting the application that has opened the outgoing port.

Note: To add a service to the Outgoing port, an active service must first be deactivated. Then you can choose the ‘Outgoing’ option from the Activa- tion menu (highlight a service, right-click or press the [SPACE] bar to display the Activation menu).

5.7.4 Active Conn. Tab

The Active Conn. tab lists the Name, Address, and Type of the currently active connections. The table is periodically updated, but it can take a few seconds before it reflects the actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for scanning as well as the service connections.

Note: You can change the device-name and description of your radio by clicking on the System icon in Control Panel, which will open the System Proper-

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 119