Psion Teklogix 7530 G2 user manual Imager Options, TekImager Enabled, Center Bar Code Only

Chapter 5: Configuration

Imager

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Field Size/Chars

Refer to page 148 for details.

5.11.5 Imager

•Tap on the Scanner dropdown menu, and choose Imager.

5.11.5.1 Imager Options

TekImager Enabled

Setting this option to on enables the imager installed in your hand-held.

Continuous Scan Mode

Setting this parameter to on keeps image capture active and continuously decoding as long as the scanner button is pressed and held down.

Center Bar Code Only

Note: This parameter must be disabled when reading Composite bar codes.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 187