Psion Teklogix 7530 G2 user manual Tether Adaptor Cables

6.12 Tether Adaptor Cables

The following standard tether cables are available for the external scanners:

•CA1010 JB5 to DE9 RS232 Serial Cable: Straight through wiring.

•CA1015 JB5 to DE9 RS232 Serial Cable: Null modem (signal lines are crossed-over).

•CA1020 JB5 to Type B USB: Connects to USB devices with Type B receptacles.

For the pinout diagrams for 7530 G2 USB cables PN CA1020 and PN CA1010, refer to Appendix B: “Port Pinouts”, page B-3

Special intermediate cabling assemblies are available to allow older devices or unique peripherals to be connected to the JB5 tether port. These cabling assemblies permit scanner cables to be re-terminated in an intermediate in-line connector (called LTW), which then interfaces to one of a number of standard adaptor cables with JB5 terminations.

These kits include assembly instructions and include the mating connector.

•1002162 Cable Adaptor LTW - JB5 Scan Decoded.

•1002163 Cable Adaptor LTW - JB5 Scan Undecoded.

•1002164 Cable Adaptor LTW - JB5 Scan RS-232.

•1002165 Cable Adaptor LTW - JB5 Scan RFID.

•1002166 Cable Adaptor LTW - JB5 Scan USB.

Contact Psion Teklogix support services (see Appendix A: “Support Services And Worldwide Offices”) for assistance in the creation of these cable assemblies if you wish to take advantage of this capability.