Psion Teklogix 7530 G2 user manual Set Length L1, Set Length L2, And Set Length L3, Length Mode

Chapter 5: Configuration

Decoded (Intermec ISCP)

Check Digit Verification

When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm: either USS (Uniform Symbology Specification) or OPCC (Optical Product Code Council).

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Set Length L1, Set Length L2, And Set Length L3

Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner.

Length Mode

You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.

Field Size/Char

Refer to page 148 for details.

5.11.4.11 Code 93

Enabled

Set this parameter to on to enable “Code 93”.

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Field Size/Char

Refer to page 148 for details.

5.11.4.12 Code 11

Enabled

Set this parameter to on to enable “Code 11”.

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 181