Efficient Networks 107-0001-000 manual System moveiproutingtable

Chapter 4: System Commands	Efficient Networks® Router family
	Command Line Interface Guide

system moveiproutingtable

Moves a range of IP addresses to another virtual routing table. The command first looks at the address ranges defined for other virtual routing tables, searching for the addresses to be moved. If it finds addresses to be moved, it deletes them from the address ranges for the other virtual routing tables. The command then adds the specified address range to the virtual routing table named on the command.

To list the routes in the virtual routing tables, use the iproutes command or the remote listiproutes command. For more information, see”Virtual Routing Tables” on page 6-2of the Technical Reference Guide.

Mgmt Class

Network (R/W)

Input Format

system moveiproutingtable <first ip addr> [<last ip addr>] <tablename>

Parameters

<first ipaddr>a First IP address of the range to be moved.

<last ipaddr>a	Last IP address of the range to be moved.b
<tablename>c	Name of the virtual routing table to be assigned the address
	range. The virtual routing table may be new or it may already exist.

aDotted-decimal notation

bMay be omitted if the range contains only one IP address.

cASCII string

Examples

With this command, all packets with source addresses in the range 192.168.254.11 through 192.168.254.20 to be routed using virtual routing table MIGUEL. Addresses in that range may already be assigned to other virtual routing tables. Therefore, to delete the addresses from any other virtual routing tables and assign the address range to MIGUEL, enter this command:

-> system moveIPRoutingTable 192.168.254.11 192.168.254.20 MIGUEL

Response

Command prompt.

Page 4-42 Efficient Networks®