Efficient Networks 107-0001-000 manual Telnet Session for Remote Access

Efficient Networks® Router family	Chapter 1: Introduction
Command Line Interface Guide

Telnet Session for Remote Access

From the local area network you can use TELNET to login in using the Ethernet IP address. (For more information, see Telnet Remote Access.)

NOTE:

Remote access to the router configuration can be disabled or restricted. For further information, see “Controlling Remote Management” on page 5-15.

Step 1 Make sure that your PC and router addresses are in the same subnetwork. For example, the router address could be 192.168.254.254 and the PC address could be 192.168.254.253.

Step 2 Start a TELNET session.

a.If you are using a PC running Windows“95/98/NT“, select Start > Run. If on a UNIX system, bring up a shell window.

b.In the Run dialog box (or shell) window, enter:

telnet 192.168.254.254

c.Click OK, or press <Enter>.

Step 3 A TELNET window will be launched; a line identifying the router will be displayed, followed by the Login: prompt as shown below.

Efficient 5950 G.SHDSL [ATM] Router (5950-001)Ready

Username:

Task Complete

Efficient Networks® Page 1-7