Efficient Networks 107-0001-000 manual IPSec Commands, Ipsec add saname, Ipsec add showrx

Efficient Networks® Router family	Chapter 12: IKE/IPsec Commands
Command Line Interface Guide

IPSec Commands

The following commands allow you to define an IPSec connection without IKE. To read about IPSec Security, see “IPSec (Internet Protocol Security)” on page 5-50.

NOTE:

If you define a tunnel using IPSec commands, the keys will remain static. This could pose a security risk and is not recommended. Use of IKE for key management is recommended.

ipsec add

Defines an IPSec security association (SA) name.

Mgmt Class

Security (R/W)

Input Format

ipsec add <saname>

Parameters

<saname>a Name for the new IPSec SA.b

aASCII string

bTo see the SA names in use, use the ipsec list command.

Example

-> ipsec add show_rx

Response

Command prompt.

Efficient Networks® Page 12-45