Efficient Networks 107-0001-000 manual System addsnmpfilter

Chapter 4: System Commands	Efficient Networks® Router family
	Command Line Interface Guide

system addsnmpfilter

Validates SNMP clients by defining a range of IP addresses that are allowed to access the router via SNMP. This validation feature is off by default. This command is functionally equivalent to the snmp addsnmpfilter command.

NOTE:

This command does not require a reboot and is effective immediately.

NOTE:

To list the range of allowed clients, use the system list command. To delete addresses from the SNMP filter, use the system delsnmpfilter or snmp delsnmpfilter command.

For more information, see ”Controlling Remote Management” on page 5-15of the Technical Reference Guide.

Mgmt Class

Security (R/W)

Input Format

system addsnmpfilter <first ip addr> [<last ip addr>] lan

Parameters

<first ipaddr>a First IP address of the client range. <last ipaddr>a Last IP address of the client range.b

lan Local Ethernet LAN.

aDotted-decimal notation

bMay be omitted if the range contains only one IP address.

Response

Command prompt.

Page 4-12 Efficient Networks®