Efficient Networks 107-0001-000 manual Lists the supported Dhcp keywords, Ticular client or subnet

Efficient Networks® Router family	Chapter 8: DHCP Commands
Command Line Interface Guide

CHAPTER 8

DHCP COMMANDS

The following DHCP (Dynamic Host Configuration Protocol) commands allow you to:

•Enable and disable subnetworks and client leases.

•Add subnetworks and client leases.

•Set the lease time.

•Change client leases manually.

•Set option values globally, for a subnetwork, or for a client lease.

•Enable/disable BootP.

•Use BootP to specify the boot server.

•Define option types.

The DHCP commands described in this section are included in Table 8-1, “DHCP Command Listing”. To read about DHCP concepts and the DHCP configuration process, see “DHCP (Dynamic Host Configuration Protocol)” on page 4-2of the Technical Reference Guide.

	Table 8-1: DHCP Command Listing
Command		Function
dhcp ?		Lists the supported DHCP keywords.
dhcp add		Provides one of three types of DHCP definitions:
		subnetwork, client lease, or option type.
dhcp addrelay		Adds an address to the DHCP relay list.
dhcp bootp allow		Allows a BootP request to be processed for a par-
		ticular client or subnet.
dhcp bootp disallow		Denies processing of a BootP request for a partic-
		ular client or subnet.
dhcp bootp file		Specifies the boot file name (kernel) and the sub-
		net to which it applies.

Efficient Networks® Page 8-1