Efficient Networks 107-0001-000 manual Sntp request, When entered with a number parameter

Chapter 2: Status Commands	Efficient Networks® Router family
	Command Line Interface Guide

When entered with a <number> parameter:

-> sntp prefserver 3

Preferred SNTP server is set to 3 (192.6.38.127)

sntp request

Requests the time from an SNTP server. (SNTP is the Simple Network Time Protocol defined by RFC 1769.)

NOTE:

A request is performed only if SNTP is enabled (see sntp enable).

Mgmt Class

Admin (R/W)

Input Format

sntp request

Parameters

None

Response

When entered while sntp function is currently disabled:

-> sntp request

SNTP is currently disabled

When entered and no sntp preferred server is defined:

-> sntp request

Time server IP address not set, use "sntp server w.x.y.z"

When entered and an sntp preferred server has been defined:

-> sntp request

Time set to UTC-480, 5/7/2001 at 17:29:25.245

Time adjusted for (-) 0 days 1 hours 0 minutes 0 seconds

Page 2-26 Efficient Networks®