Efficient Networks 107-0001-000 manual Protocolid a Numerical protocol ID, MP port

Efficient Networks® Router family	Chapter 5: Ethernet Interface Commands
Command Line Interface Guide

Parameters Cont.

<protocol>	Protocol used by the selected server.
<protocolid>a Numerical protocol ID.
tcp	TCP only.
udp	UDP only.
all	All protocols.

<first port> First or only port as seen by the Ethernet interface. Port used by the selected server.

<portid>b	Numerical port value; a value of 0 matches
	any port.
ftp	File Transfer Protocol (FTP) port.
h323	H.323 port.
http	Hypettext Transfer Protocol (HTTP) port.
smtp	Simple Mail Transfer Protocol (SMTP) port.
snmp	Simple Network Management Protocol (SN-
	MP) port.
t120	T.120 port.
telnet	Telnet port.
tftp	Trivial File Transfer Protocol (TFTP) port.
all	All ports.

<last port>

<first private port>c

<interface>a,c,d

Optional, last port in the range of ports as seen by the remote end for the server on the LAN.

If specified, this is a port remapping of the incoming requests from the Ethernet interface.

Ethernet interface.

aInteger

bInteger, 0 - 65,535

cThis parameter may be omitted if the router has only one Ethernet interface.

If the router has two physical Ethernet interfaces (an Ethernet hub router), the port number (0 or 1) must be specified.

dTo specify a logical interface other than logical interface 0, specify both the port number and the logical interface number (<port #>:<logical #>, for example, 0:1).

Response

Command prompt.

Efficient Networks® Page 5-17