Efficient Networks 107-0001-000 manual Nsap, Remote setauthen protocol remotename

Efficient Networks® Router family	Chapter 6: Remote Commands
Command Line Interface Guide

Mgmt Class

Network (R/W)

Input Format

remote setatmnasp atmf e164 partial full <nsap> <remotename>

Parameters

atmf	ATM forum encoding.
E164	ITU E164 encoding.
partial	The MAC address of the router is substituted for octets 2-7 of
	the NSAP.
full	No change is made to the specified NSAP.
<nsnap>a	NSAP

aspecified as 40 hex digits or 20 octets (2-digit pairs separated by colons

Response

Command prompt.

remote setauthen

Sets the authentication protocol used communicate with the remote router. The authentication protocol is the minimum security level that the target router must use with the remote router; this level is verified during security negotiation. The router will always attempt to negotiate the highest level of security possible (CHAP). The router will not accept a negotiated security level less than this minimum authentication method.

The parameter in the remote router database is used for the local side of the authentication process; this is the minimum security level used by the target router when it challenges or authenticates the remote router.

Mgmt Class

Security (R/W)

Input Format

remote setauthen <protocol> <remotename>

Efficient Networks® Page 6-41