Efficient Networks® Router family

Chapter 6: Remote Commands

Command Line Interface Guide

 

 

 

remote disable

Disables the remote. The remote remains disabled even after a reboot. To enable the remote, the command remote enable must be entered.

NOTE:

You may enter and save information and settings for a disabled remote entry. However, the remote entry cannot be used until it is enabled.

NOTE:

If the remote is currently active when the remote is disabled, the active session is not stopped. To stop the active session, use the remote stop command.

Mgmt Class

Network (R/W)

Input Format

remote disable <remotename>

Parameters

<remotename>a Name of the remote router.

aASCII string

Response

Command prompt.

remote disauthen

This command is intended for situations where third-party routers cannot be authenticated; the target router will not attempt to authenticate the remote router.

Mgmt Class

Security (R/W)

Input Format

remote disauthen <remotename>

Efficient Networks®

Page 6-25

Page 213
Image 213
Efficient Networks 107-0001-000 manual Remote disable remotename, Remote disauthen remotename