Efficient Networks 107-0001-000 manual Hdsl terminal, Used to override auto-speed on the CPE

Chapter 7: WAN Interface Commands	Efficient Networks® Router family
	Command Line Interface Guide

Parameters

***When entered with no parameters, the current speed is dispaly- ed. a

384Authorized non-default speed for the CO in Mbps.

1168	Authorized non-default speed for the CO in Mbps.
noautob	Used to override auto-speed on the CPE.

aAvailable only if the modem has activated successfully.

bhdsl speed noauto should be followed by the command hdsl save to be persistent across restarts and reboots.

Response

Command prompt:

hdsl terminal

The router is by default configured as the Customer Premises Equipment (CPE). Use this command if you intend to configure the router as the Central Office equipment (CO).

•hdsl terminal cpe defines the CPE end (default configuration)

•hdsl terminal co defines the CO end.

•hdsl terminal displays the current settings.

Mgmt Class

Network (R/W)

Input Format

hdsl terminal [cpe co]

Parameters

***When entered with no parameters, the current mode is displayed.

cpe	Sets the terminal operation mode to CPE.
co	Sets the terminal operation mode to CO.

Response

Command example displaying current mode:

-> hdsl terminal

Customer Premise

Page 7-26 Efficient Networks®