VIEWING PICTURES
Switch the ON /OFF switch on the frame to ON or press the 
button on the handset to bring the frame out of Standby.
If there is a memory device inserted the device will start a slideshow. When the frame detects a memory devices it displays all the viewable images. All folder structures are ignored.
VIEWING PICTURES IN SLIDE SHOW MODE
Slide show mode displays all viewable pictures in sequence.
•To move to the next picture: Press the 
key once
•To move on several pictures: repeatedly press the 
key.
•To move to the previous picture: Press the 
key once
•To move back several pictures: repeatedly press the 
key.
PAUSE MODE
•To pause the slide show: Press the OK key
•To advance one picture at a time: Press the 
key.
•To go back one picture at a time: Press the 
key
•To resume normal slideshow play: Press the OK key again.
ZOOM AND PAN
Press the 
key to cycle the picture size:
→ x2 → x4 → x8→x16 →Normal...
Entering ZOOM mode automatically pauses the slideshow.
When the Zoom is positive (i.e greater than 1)
•Press the 
keys to pan the picture to left or right
•Press the 
keys to pan the picture up or down
•To resume slideshow play: cycle Zoom to Normal and press OK.
CHANGING THE ASPECT RATIO
•Press the 
key to change the aspect ratio from 4:3 to 16:9. What does this mean? Most digital cameras take pictures in the ratio 4:3. This is also the ratio of the frame. If a picture is in “widescreen” mode (16:9), pressing the 
key will increase the picture’s height to fit the frame screen, though the sides may be cropped.
You can also use this key to change the ratio the other way. The picture will be compressed sideways to fit the screen though in this case you may see black bars above and below the picture.
Press the key again to restore normal screen size.
Note: This feature can only be be used when a picture is larger than the frame. If a picture is fully visible in the frame the key has no effect.
Page 10
