Efficient Networks 107-0001-000 manual Ike proposals set encryption, Ike proposals set lifetime

Chapter 12: IKE/IPsec Commands	Efficient Networks® Router family
	Command Line Interface Guide

ike proposals set encryption

Sets the IKE proposal parameter that requests ESP encryption and specifies the encryption method used. See “IKE Proposal Commands” on page 5-58.

Mgmt Class

Security (R/W)

Input Format

ike proposals set encryption <des 3des> <proposalname>

Parameters

Choose one of the following:

des	Use DES (56-bit) encryption.
3desa	Use 3DES (168-bit) encryption (if 3DES encryption is enabled).

<proposalname>b Name of the IKE proposal to which the encryption parameter is added.c

aSoftware Option Key enabled feature

bASCII string

cTo see the proposal names in use, use the ike proposals list command.

Example

-> ike proposals set encryption des my_ike_proposal

Response

Command prompt.

ike proposals set lifetime

Sets the IKE proposal parameter that specifies the length of time (in seconds) before the Phase 1 SA expires; the recommended value is 86400 (24 hours). When the time limit expires, IKE renegotiates the connection. See “IKE Management” on page 5-52.

Mgmt Class

Security (R/W)

Input Format

ike proposals set lifetime <seconds> <proposalname>

Page 12-42 Efficient Networks®