IBM C79EGMST Frequently Asked Questions, Device, orauto/disable, onDisable, Selectenable

Title: C79EGMST CreationDate: 02/10/98 09:24:42

3

4

Frequently Asked Questions

Click on theSerial Port button.

Click onEnable .

A “Warning”		might appear that the hardware resou
is	being used by another communication device.
5 Click	onDisable	Device .

Another “Warning” window prompts you to restart yo computer.

6 Click onOK . The computer restarts.

Note: If you check your serial port and it is alre enabled, you can use it immediately without cha any settings.

After your serial port is enabled, you can use it communication port. If it does not work properly, you have a problem with the communication software applica or the cable or device attached to the serial po online help system for your communication software if cable and attached device appear to be working pro

How can I use an external mouse when I am at my desk, but then use the TrackPoint when I am away from my desk?

The TrackPoint has an “auto/disable” setting that disa when you power on or restart the computer with an mouse attached. When you want to enable the TrackPoi remove the external mouse; then restart the computer.

Note: You can set up the TrackPoint manually with the ThinkPad Configuration program as follows:

1 Start the ThinkPad Configuration program.

2

3

4

Click	on	theTrackPoint	button.
Selectenable		, disable	, orauto/disable .
Click	onOK .

Chapter 4. Solving Computer Problems107