IBM C79EGMST manual You have finished installing the DIMM. Reconnect all cables

Title: C79EGMST CreationDate: 02/10/98 09:24:42

Increasing Memory

6	Replace		the	battery		pack.
7	Turn	the	computer		over	again, power on		the computer;
	then	confirm		that	the	new	memory size	appears at
	upper left			corner	of	the	screen.

For example, if you install the 32-MB DIMM you should see following: See the next page for how to calculate the to memory size.

6496 KB OK

You have finished installing the DIMM. Reconnect all cables

Notes:

1.For the following status, power off the computer and go to pag reinstall the DIMM and do the memory test with Easy-Setup (see “Testing Your Computer” on page 144).

If2 a1 error code appears under the memory count.

48576 KB OK

2 1

If the total memory size is not the same as the value you

If the 225 error code appears, the memory you are installing supported by your computer.

2. If you changed the memory installed in the computer, you need

a new hibernation file. To create thehibernation“Basic” infilethe online book.

52 IBM ThinkPad 600 User's Reference