IBM C79EGMST Station, USB Connector Considerations, Using the Power Management Modes, call, after

Title: C79EGMST CreationDate: 02/10/98 09:24:42

Hints, Tips, and Limitations

Using the Power Management Modes
You can select eitherResume	ontheincoming	call	option or the
Hibernate X minutes after suspend	option but not both. If you
select one option, the other option becomes gray and canno
selected.
To enableResume on incoming call	,	do as	follows:

1.Start	the		ThinkPad		Configuration		program.
2. Click	on	theResume/Suspend			options		tab.
3. Click	onResume		on	incoming	call	.
To enableHibernate			X	minutes	after	suspend	, do as follows:
1.Start	the		ThinkPad		Configuration		program.
2. Click	on	theHibernation			tab.
3. Click	onHibernate X			minutes after		suspend	.

Using a PC Card with	the	Docking	Station
In the Windows 95, Windows NT, Windows 3.1, or DOS
environment,		you	need	to	install the	PC	Card	supportafter software
docking your computer to the docking station. If you have
installed		the PC	Card	support software, uninstall it					and then
it	after	you	dock	your	computer	to	the	docking	station.

USB Connector Considerations

For PCI Cards in the SelectaDock III Docking Station

When the setting of the USB connector on your computer is (the default setting), do not use a PCI Video Card and Network Card at the same time in the SelectaDock III doc station. Your system cannot start if both cards are insert

For the USB Connector Setting on the SelectaDock III Dock Station

Do not disable the USB connector on the SelectaDock III. disable it, the system might hang during a hot- or warm-doc undock operation. If this occurs, cold-boot the system for

Chapter 4. Solving Computer Problems113