Efficient Networks 107-0001-000 Lists the supported Snmp keywords and com, Mands, Longs, Face

Efficient Networks® Router family	Chapter 17: SNMP Commands
Command Line Interface Guide

CHAPTER 17

SNMP COMMANDS

This section contains SNMP command descriptions. For a complete discussion of SNMP, see “SNMP” on page 7-2.

The SNMP commands found in this section include:

	Table 17-1: SNMP Command Listing
Command		Function
snmp ?		Lists the supported SNMP keywords and com-
		mands.
snmp addsnmpfilter		Validates SNMP clients by defining a range of IP
		addresses that are allowed to access the router via
		SNMP. Same function as system addsnmpfilter.
snmp addtrapdest		Adds an SNMP Trap manager by IP address.
snmp community		Sets the SNMP community to which the router be-
		longs.
snmp delsnmpfilter		Deletes the specified SNMP client range. Same
		function as system delsnmpfilter.
snmp deltrapdest		Deletes a SNMP Trap manager by IP address.
snmp disablesnmpif		Disables SNMP access from the specified inter-
		face.
snmp enablesnmpif		Enables SNMP access from the specified inter-
		face.
snmp settrapenable		Enables or disables transmission of unsolicited
		trap event messages to trap destinations.
snmp snmppasswd		Sets an authentication password for an SNMP
		Manager.
snmp snmpport		Manages SNMP port access. Same function as
		system snmpport.

Efficient Networks® Page 17-1